Protect PACT Prime (A 30)

Acrylic dispersion polymer-based primer

Color	Dried Rose, Mustard Yellow
Density	1.54 kg(±0.05)/l
Packaging	12 kg Plastic Bucket
Shelf Life(25°C 55%RH)	12 Months(Unopened)
Consumption(Single Layer 0.2-0.4 mm)	0.150-0.250 kg/m²
Drying Time	45-60 Minutes
Complete Drying Time	24 Hours
Recommended Application Thickness	0.2-0.4 mm(Depending on the surface)

PROTECT-A 030 GROSS CONCRETE PRIMER is an acrylic dispersion polymer-based primer.

Indoors; vertical surfaces and ceilings.
To increase the adherence of gypsum, lime and cement-based plaster mortars to the gross concrete surface.
It is used as a primer in ceiling plasters.

Make sure the intended application surface is solid and free from any frost, ponded water, oil, grease, paraffin, coatings,cement grout, any loose particles or any other contaminants that could affect the process.
Surface should be prepared with appropriate mechanical preparation techniques(with the help of high-pressure washer and/or with the help of other abrasive equipment).
All dusts, loose and crumbling materials should be removed from the surface either with the help of a brush or by vacuuming.
Primer should be mixed homogenously using a low rpm mixer (400-600 rpm) with a ratio of 4 to 6 liters of water per 12 kg of 030 Gross Concrete Primer.
Mixing process can be accomplished using either the product’s own bucket or within a clean suitable container, free from any contaminant that can prevent and/or hinder adhesion.
For the duration of the whole application process the mixed product must be periodically stirred.
Can be applied with a brush, roller or via spraying.
Must be applied on a surface that is between 5 degrees of Celsius and 30 degrees of Celsius.

[wpdm_package id=’2394′]

Please fill in the form to request product samples or for your inquires and we will get back to you.