+90 (312) 939 86 92 Monday - Saturday 08:00 - 18:00 (GMT+3) Next Level A Blok Kat T No:3C1-160 Çankaya-Ankara, TR

PROTECT-A 035 UNIVERSAL PRIMER

Water-based, one component, transparent universal primer

Technical Specifications

ColorTransparent
Application temperature+5˚C to +35˚C
Packaging12 kg plastic bucket
Shelf life(25˚C 55%RH)12 Months(Unopened)
Consumption(diluted and variable)0.10 – 0.20 kg/m²
Through drying time4 hours
Viscosityapp. 8000 - 10000 mPa.s
Density1,00 ± 0,10 kg/l
pH (at 25˚C)7.0 – 9.0
Solid content> % 50
Water transmission rate (kg/m²,h 0,5)< 0,1 CLASS W3
Permeability to water vapour (m)5 ≤ SD ≤ 50 CLASS II

Description

PROTECT-A 035 UNIVERSAL PRIMER is a water-based, one component, transparent universal primer.

Area of Use

  • In all kinds of cement mortars.
  • In plaster and screed applications.
  • In mortar applications and before tile and ceramic applications.
  • Repair mortars, cold joints.
  • In concrete repairs.
  • In pre-plastering applications.
  • To be used as a primer before waterproofing applications.

Product Features and Advantages

  • Cost efficient.
  • Can be used safely indoors and enclosed areas since it does not contain any flammable or toxic materials.
  • Environmentally friendly (water based).
  • Creates a seamless and uninterrupted insulation layer.
  • Applied cold hence does not require heating.
  • Can be used without thinning.

Application Instructions

  • Make sure the intended application surface is solid and free from any frost, ponded water, oil, grease, paraffin, coatings, cement grout, any loose and weak particles or any other contaminants that could affect the process.
  • Surface should be prepared with appropriate mechanical preparation techniques (with the help of high-pressure washer and/or with the help of other abrasive equipment).
  • All dust, loose and materials that can easily crumble should be removed from the surface either with the help of a brush or by vacuuming.
  • Should be mixed thoroughly until it is homogenous before use
  • Should be diluted with water at a rate of 7 to 1 (based on volume).
  • It can be applied via brush or roller as a single layer.
  • The paint or insulation product application should be after a minimum drying time of 4 hours.
  • High humidity and/or low temperatures will prolong curing time.
  • Air and surface temperature for application must be +5°C to +35°C and must remain so for a minimum of 24 hours.
  • The surface should be protected from rain, water, mechanical loads and impacts for 24 hours during and after the application. It should not be applied in very windy and direct sunlight.

Leave us your info

Please fill in the form to request product samples or for your inquires and we will get back to you.

    Leave a Reply