Protect PU Prime 1K (PA 011 T)

Polyurethane based impregnation primer

Color	Yellow, Brown
Density	1.1 kg(±0.05)/l
Packaging	20 kg Tin Bucket
Shelf Life(25°C 55%RH)	12 Months(Unopened)
Consumption(Single Layer 0.2-0.4 mm)	0.150-0.200 kg/m²
Drying Time	45-60 Minutes
Complete Drying Time	24 Hours
Recommended Application Thickness	0.2-0.4 mm(Depending on the surface)
Pot Life	45-60 Minutes

PROTECT-A PA 11 T is a polyurethane based, one component, solvent, moisture curing, low viscosity transparent impregnation primer.

On concrete, lightweight concrete, cement based mortars.
On floors subject to medium and heavy loads.
As an impregnation primer before the application of epoxy or polyurethane top coatings.
As an impregnation primer before parquet adhesive in parquet applications on concrete.
As a primer for waterproofing joints of ceramic tiles and similar floor tiling.

After penetrating the application surface, as a result of a chemical reaction with the moisture apparent in the air and on the surface, it creates a protective layer.
Eliminates the adhesion problems, that stem from the ground conditions, (reaction distortions) of the insulation material.
High adhesive strength.
Prevents chalking.

Application surface must be clean, dry, flat and free of dirt, dust, oil, wax, and mold.
All kinds of loose, dusty, cracked, crusted and pre-painted surfaces, should be cleaned with sanding, brushing, with a wire brush and/or with the aid of a machine (pressurized water spray or sandblasting).
Damaged or weathered surfaces must be repaired.
Surfaces that contain old paint and unevenness should be sanded.
The surface on which the primer will be applied must be clean, free from oil and dirt, and must be dry.
PROTECT-A PA 011 T should be mixed thoroughly and can be applied to the surface with the help of a brush or roller.

[wpdm_package id=’2415′]

Please fill in the form to request product samples or for your inquires and we will get back to you.